=== Two-Speed mod ===
//For Tremulus Lune, Panneur, Phaseur, and other LFO-based effects//


One SPDT stompswitch chooses between two preset speeds.

Add one potentiometer for the new speed control. Disconnect the fine 2 end of the wire which runs between fine 2 and the board, and reconnect that end to the center post of the SPDT. Now, install a new wire from fine 2 to one of the outer posts of the SPDT. Next, install a wire from new speed 1 to the remaining post on the SPDT. Finally, install a wire from new speed 2 to speed 2. (Speed 2 will now have two wires; one going to the board, the other going to new speed 2.)

Diagram soon.

[Edit] You has SPST down, I changed it so SPDT for you

//Thanks.  -doug//

[DG] I moved this to it's own page. [[How to make a new page]]